Brightspeed internet not working? Check for a Brightspeed outage

The official Brightspeed check for outages

Brightspeed doesn’t have an official outage map, but you can get a quick visual using the crowdsourced Brightspeed outage map at downdetector.com.

For a more official and personalized outage check, use Brightspeed Troubleshooter (via mobile data, of course, since your Brightspeed internet probably isn’t working).

Troubleshooter taps directly into the Brightspeed network

Troubleshooter taps directly into the Brightspeed network, from the area-wide system right down to the wiring in your home, and runs automated tests to find the source of the internet or phone service outage.

When you run Troubleshooter, your results will usually fit one of these categories. In every scenario, you can count on step-by-step guidance to resolve your Brightspeed outage or service issue.

• An area outage. A known outage usually means the larger Brightspeed network in your area is down, and Brightspeed is already working to repair the problem. You should see an estimate on when service will get back up, and you can request notifications so you’ll receive updates without running Troubleshooter again.
• A home outage. Smaller Brightspeed outages can also affect service at your address, whether it’s an issue with your connection to the larger network or a problem with the equipment inside your home. If Troubleshooter detects one of these outages, you can create a repair ticket without calling in.
• Non-outage problem. If there’s no Brightspeed service outage to be found, you’ll see prompts to help you dig into other technical issues, like frequently dropped phone calls or slow speeds (e.g., if you have the 1 Gig or 2 Gig plan but can’t even get photos and videos to load on social media). If Troubleshooter still can’t help, you’ll receive instructions on contacting customer support.

Go To Troubleshooter →

DIY troubleshooting

If you can’t run Troubleshooter using mobile data, try a few DIY solutions. These easy, practical steps are a good starting point for any technical issue you experience.

• Check wiring. Make sure your modem/router, phone hardware, and any Ethernet connections are properly plugged into power outlets and wall jacks.
• Reboot your modem. Unplug your modem and wait 60 seconds, then plug it back in. Make sure you wait the full minute for best results.
• Verify account status. Make sure your Brightspeed account is in good standing and you don’t owe any payments.